EV Charger Installation in Quebec

Installing a Level 2 EV charger at home is an electrical project. This page explains the steps to follow in Quebec, what affects the cost of an installation and how to find an authorized KENI installer near you.

The steps of a home charger installation

1. Choose your charger

Pick the connector that matches your vehicle's port (J1772 or NACS) and the power that suits your vehicle and your home: 48A J1772, 48A NACS, 80A J1772 or 80A NACS.

2. Have your electrical panel assessed

The electrician checks your panel's available capacity, the space for a new breaker and the distance between the panel and where you park. It's also time to choose where the charger goes: on a wall or on a pedestal.

3. Get a quote

Ask for a written quote that details the work, the materials and the current setting planned for the charger.

4. Install and set up the charger

The electrician connects the charger to a dedicated circuit and sets its current to match your installation's capacity: 6 to 48 A on 48A models, 6 to 80 A on 80A models.

5. Connect the charger to the KENI app

Once the charger is connected to Wi-Fi, the app lets you track your sessions, schedule charging and take part in the KENI Privilege Club.

6. Apply for financial assistance

The KENI charger is on the list of chargers eligible for Quebec's Écorecharge program. Keep your invoices and proof of installation. See our Écorecharge guide for details.

What affects the cost of an installation

Every home is different, which is why a quote is needed. The main factors are:

• The distance between the electrical panel and the charger.
• Your panel's capacity: a panel upgrade costs more than load management with the current sensor.
• The location: garage, outside wall or pedestal in the driveway or yard.
• Finishing work: drilling, wire routing, trenching.

A charger built for Quebec winters

The KENI 48A charger has a NEMA 4 / IP65 enclosure for indoor or outdoor installation, operates from -30 °C to 50 °C and has a 7 m cable designed to stay flexible in cold weather. For winter charging tips, read our extreme cold charging guide.

Where to get your charger installed

KENI Électrique, an authorized KENI installer, serves Montreal, Laval, the Laurentians and Lanaudière, for residential, commercial and multi-unit projects.

Elsewhere in Quebec or Canada, visit our Find an installer page. If no installer is listed in your area yet, contact us and we will help you find a solution.

Frequently asked questions

Can I install the charger myself?

Connecting a Level 2 charger is electrical work. In Quebec, have it done by a qualified electrical contractor.

Is my electrical panel powerful enough?

It depends on its capacity and your home's consumption, which is what the electrician assesses. If capacity is limited, the KENI current sensor measures consumption in real time and adjusts the charger's current so the panel's limit is never exceeded. It works with KENI smart chargers, including models up to 48 A.

Is the installation subsidized?

For a house or duplex, Écorecharge assistance is a flat $600 for the charger; installation costs are not covered. In multi-unit buildings, part of the installation may be eligible. Check the conditions on Québec.ca.

Can the charger be installed outdoors?

Yes. The KENI 48A charger is rated NEMA 4 / IP65 and is suitable for indoor or outdoor installation.

48 A or 80 A: which one should I choose?

An 80A charger needs a more powerful circuit and is only useful if your vehicle's onboard charger accepts more power. Your electrician can advise you based on your vehicle and your panel.

This page provides general information. Exact requirements depend on your installation and the applicable rules: your electrician will advise you.