EV Charging for Condos and Multi-Unit Buildings in Quebec

Are you on a condo association board, a property manager, the owner of a multi-unit building or a condo owner who wants to charge your EV at your own parking spot? This guide brings together everything you need to equip a building in Quebec: the two possible solutions, load management with DCC controllers, Écorecharge assistance in 2026, the steps of a project and choosing the chargers.

KENI EV charger installed on a pedestal in front of a multi-unit building in Quebec
Key points
  • Two solutions: an individual charger connected to the unit's meter, or a building-wide project on the common installation.
  • A DCC-9 load controller lets you add a charger to a unit's electrical service without upgrading it: it temporarily cuts the charger when consumption exceeds 80% of the main breaker.
  • With a DCC-9, the charger's electricity is billed by Hydro-Québec to the owner: no rebilling for the association.
  • Écorecharge 2026: up to $5,000 for an individual charger, 75% of the analysis, 50% of infrastructure (up to $120,000 per building) and $600 per charger.
  • KENI chargers are OCPP 1.6J compatible, include an RFID card, are built for winter and are on the Écorecharge list.

Two ways to equip a building

Two ways to equip a building: individual solution with a DCC-9 controller or shared solution with an OCPP platform

1. The individual solution: one charger per owner

The charger is connected downstream of the unit's Hydro-Québec meter. The electricity used is billed directly to the owner by Hydro-Québec, with nothing for the association to manage. When the unit's panel lacks the capacity or space, a load controller is added between the meter and the panel. According to Hydro-Québec, this solution requires a meter that is accessible from the parking area; otherwise, a shared solution should be considered.

2. The shared solution: a building-wide project

The association or owner connects several chargers to the common installation, often with an electrical upgrade and a power-sharing system. Thanks to OCPP 1.6J, KENI chargers can connect to a management platform to control access, share power and bill users.

Individual solutionShared solution
ConnectionThe unit's meter, with a load controller if neededThe building's common installation
BillingHydro-Québec, directly to the ownerBy the association or a platform (approved meters required to bill by the kWh)
Load managementDCC-9 or DCC-11 controllerPower sharing among chargers (OCPP)
Work for the associationApprove the installationRun the project, billing and maintenance
KENI Privilege ClubYes, with the KENI appYes if the charger stays managed by the KENI app; no if it is connected to another company's OCPP platform
Écorecharge assistanceIndividual charger in a multi-unit buildingAnalysis, infrastructure and charger installation streams

Load management: RVE's DCC controllers

In an existing building, available electrical capacity is often the first obstacle. Instead of upgrading the electrical service, a load controller uses unused capacity: it temporarily interrupts charging during consumption peaks, then restarts it. This is the solution Hydro-Québec describes for connecting a charger to a unit's meter.

How the DCC-9 load controller works: continuous metering, charger cut above 80% of the main breaker, restart after 15 minutes below 80%

How the DCC-9 works

  1. It continuously measures the unit panel's total consumption, using two pre-wired current sensors.
  2. Above 80% of the main breaker's capacity, it temporarily de-energizes the charger.
  3. When consumption stays below 80% for more than 15 minutes, it re-energizes the charger.

According to RVE's spec sheet, the DCC-9 does not affect the panel's load calculation. It mounts on a wall or ceiling near the meter, and a NEMA 3R version is available for outdoor use. Since most charging happens at night, interruptions are usually short; RVE recommends scheduling charging during low-consumption hours, which the KENI app lets you do.

A real example: a condo association with 81 units installed 29 DCC-9 controllers, one per charger. Because the Hydro-Québec meters are near the parking spots, each charging session is billed directly to the owner, and the association has nothing to manage.

Which RVE controller for which building?

RVE load controller lineup: DCC-9, DCC-11, DCC-9-BOX and PCB, DCC-12 and DCC-10, and OCPP load sharing
RVE productBest forKey features
DCC-9Condo unit or apartmentUnit panel of 60 to 125 A, charger breaker up to 60 A (30, 40, 50 or 60 A models), 240/208 V, NEMA 3R version for outdoors
DCC-11Unit with a larger panel150 to 200 A panel, charger breaker up to 60 A; ideal when the panel has no free slots
DCC-9-BOX + DCC-9-PCBNew or renovated “EV-ready” buildingThe splitter box is installed at each spot now; the electronics (PCB) are added when a resident installs a charger
DCC-12 / DCC-10House or townhouse60 to 200 A panel already at full capacity; the DCC-10 has a built-in breaker

Sources: RVE 2024 catalogue and DCC-9 and DCC-9-BOX spec sheets. Model selection and installation are up to the master electrician, who must perform a load analysis that meets the Régie du bâtiment du Québec requirements.

KENI chargers and DCC controllers: the right combination

  • KENI 48A: it connects to a 60 A breaker, the maximum rating of the DCC-9 and DCC-11.
  • KENI 80A: with a DCC, it must be set to 48 A or less, since the controller's charger breaker does not exceed 60 A. Its current adjusts from 6 to 80 A.
  • Privilege Club: the charger stays managed by the KENI app, so the owner can schedule overnight charging and join the Club.
  • J1772 or NACS: each owner chooses the connector for their vehicle.

For shared chargers: power sharing

When meters are not accessible or the association prefers common chargers, a power-sharing system divides the available capacity among several chargers, which then charge more slowly at the same time. According to Hydro-Québec, an effective power-sharing strategy can reduce the required capacity by a factor of three. OCPP 1.6J compatible KENI chargers can be managed by a platform that offers this feature.

Functions of an OCPP management platform for KENI chargers in a building

Why choose KENI for your building

Six KENI charger features: adjustable current, connectivity, RFID, winter design, 7 m cable and safety
  • OCPP 1.6J compatible: the charger can connect to a charging management platform instead of locking the building into a single provider. See OCPP EV chargers.
  • RFID card included: only authorized users can start a session in a shared parking lot.
  • Adjustable current: 6 to 48 A (11.5 kW) or 6 to 80 A (19.2 kW), to respect the electrical capacity available at each spot.
  • Built for winter: NEMA 4 / IP65 enclosure, operation from −30 °C to 50 °C and a 7 m cable designed to stay flexible down to −40 °C.
  • Certified: cETLus (UL 2594 and CSA C22.2 No. 280), ENERGY STAR and FCC.
  • Écorecharge eligible and backed by bilingual support in Canada.

See the models: 48A J1772, 48A NACS, 80A J1772 and 80A NACS.

Outdoor or underground parking

In an outdoor lot with no wall nearby, the KENI pedestal stand places the charger right in front of the spot. In an underground garage, the charger mounts on a wall or column, according to the electrician's plan.

KENI charger installed on the KENI pedestal stand in a building courtyard

Écorecharge 2026: assistance for multi-unit buildings

The Government of Quebec's Écorecharge program offers several types of assistance for buildings with three or more units. Amounts published on Québec.ca, checked on November 15, 2026:

Écorecharge 2026 assistance for multi-unit buildings: up to $5,000, 75% of the analysis, 50% of infrastructure, $600 per charger
StreamFor whomAssistance
Individual charger in a multi-unit buildingA resident installing their charger$600 for the charger, plus 50% of installation and infrastructure in some cases, up to $5,000
Charging solution analysisCondo association or owner75% of eligible expenses, up to $5,000 per building
Electrical infrastructureCondo association or owner50% of eligible expenses, up to $120,000 per building (at least 50% of residents' spots)
Charger installationCondo association or owner$600 per charger (or per port), for a charger costing at least $600 before taxes

Conditions (construction date, building type, eligible expenses, connected chargers since April 1, 2026, model on the list) are set by the government and may change. Check Québec.ca before you spend. See also our Écorecharge guide.

The steps of a condo project

Checklist for an EV charging project in a building
  1. Bring people together: the association or owner, interested owners or tenants, and a master electrician.
  2. Analyze the building: electrical capacity, meter location, parking layout and budget. The analysis can be 75% subsidized.
  3. Choose the solution: individual with DCC controllers, or shared with power sharing.
  4. Have the project approved by the association or owner, according to the declaration of co-ownership and the building's rules.
  5. Choose the chargers and how they are managed: KENI app or OCPP platform.
  6. Have a master electrician install them (CMEQ member), with the required load analysis.
  7. Submit the Écorecharge application with the supporting documents.

The KENI Privilege Club in a condo

A KENI charger managed by the KENI app takes part in the Privilege Club, including when it is connected behind a DCC controller: eligible members will earn $0.13 per eligible kWh starting January 1, 2027 and get a warranty of up to 7 years (labour excluded). It is a commercial reward, neither a government rebate nor guaranteed income. A charger connected to another company's OCPP platform is no longer managed by the KENI app and does not take part in the Club: it is one or the other. Understand the link with carbon credits.

Businesses and retail

The same strengths serve business, retail and fleet parking: OCPP 1.6J, RFID access control, adjustable power and an outdoor-rated enclosure. Write to us to discuss your project.

Planning chargers for your condo or building?
Talk to the KENI team: we help you choose the chargers, the load controller or management approach, and prepare your project with your electrician.
Contact us Find an installer

Frequently asked questions

Can a condo owner install their own charger?

Generally yes, with the condo association's approval, according to the declaration of co-ownership and the building's rules. Check with your association before buying. This information is not legal advice.

What is a DCC-9 load controller?

It is an RVE energy management system installed between a unit's meter and its panel. It measures total consumption and temporarily cuts the charger when it exceeds 80% of the main breaker, then re-energizes it after 15 minutes below that threshold. It lets you add a charger without upgrading the electrical service.

Who pays for the charger's electricity?

With a charger connected to the unit's meter, with or without a DCC-9, the owner pays directly on their Hydro-Québec bill. For shared chargers billed by consumption, federal law requires approved meters; an OCPP management platform can then assign sessions to each user.

Does the KENI 80A work with a DCC-9?

Yes, set to 48 A or less: the charger breaker of a DCC-9 or DCC-11 does not exceed 60 A. The KENI 48A works as is.

Is the KENI charger suitable for outdoor parking?

Yes. Its NEMA 4 / IP65 enclosure allows outdoor installation, and it operates from −30 °C to 50 °C. The KENI pedestal stand lets you install it where there is no wall.

What Écorecharge assistance is available for a building?

Up to $5,000 for an individual charger in a multi-unit building, 75% of the analysis (max. $5,000 per building), 50% of electrical infrastructure (max. $120,000 per building) and $600 per charger for a building-wide project, subject to program conditions.

Can a condo charger be part of the Privilege Club?

Yes, if it stays managed by the KENI app, even behind a DCC controller. If the building connects it to another company's OCPP platform, it does not take part in the Club.


Sources
Hydro-Québec, EV charging in multi-unit buildings (French, updated June 2022)
RVE, DCC-9 spec sheet, DCC-9-BOX manual and 2024 catalogue
Écohabitation, 29 chargers and 29 DCC-9 in a condo (French)
Government of Quebec, Installing charging stations in multi-unit buildings (French)
Government of Quebec, Amount of financial assistance for an individual charging station in a multiple dwelling, analysis, electrical infrastructure, charger installation (French)
KENI charger spec sheets: EV chargers